3D Core Silk Red PLA Filament 1.75 mm 1KG 3D Printer Filament Spool FDM 3D Printing Material Shiny Finish Silky PLA Glossy Metal Filament Metallic Red PLA

Start Your Artistic Creation Now!

Print Settings and tips:

1. Printing Temperature: 210-220°C
2. Hot bed Temperature: 40-60°C
3. First Layer Printing Speed: 20-25 mm / s.
4. Other Layer Printing Speed: 25mm/s (Outer layer)-40mm/s (Inner layer),the printing speed of Silk PLA is suggested to be about 30mm / s.
5. Retraction:0-4mm
6. Retraction Speed:<45mm/s
7. Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.

Possible problems:

• Some of 3D printer with Bowden Drive Extruder may have clog problems. The reason is that the softening temperature of silk PLA is lower.
• The solution method is:
• 1.Turn off Retraction settings.
• 2.It is necessary to clean up the filaments blocked in the throat before printing for second time.

Support and After-sales:

• We have been committed to producing high-quality products and providing customers with a good experience. If there is any quality problem, we will definitely solve the problem until you are satisfied.